top of page
PNR_3680-1.jpg

Profesör Doktor. Alper İLKI

Yapı ve Deprem Mühendisliği

ITU_LOGO_WHITE.png

SCI Dergi Makaleleri

A92. Yilmaz, M., G. Dogan, M.H. Arslan, A. Ilki, “Categorization of post-earthquake damages in RC structural elements with deep learning approach”, Journal of Earthquake Engineering, published on line, January, 2024.  

A91. Cengiz, A., T. Gurbuz, A. Ilki, M. Aydogan, “Dynamic and residual static behavior of axially loaded RC columns subjected to low-elevation impact loading”, Buildings, 14(1), 92, 2024.

A90. Aydogdu, A. Ilki, “Case study for a performance based rapid seismic assessment methodology (PERA2019) based on actual earthquake damages, Bulletin of Earthquake Engineering, accepted, December 2023.

A89. Tura, C., S. Aydin, U. Yazgan, K. Orakcal, A. Ilki, T. Kabeyasawa, J. Kang, “Critical issues in nonlinear modeling of reinforced concrete buildings: code-compliant modeling approaches and the 2015 e-defense shake table tests on a full-scale 10-story building”, Bulletin of Earthquake Engineering, (accepted). 

A88. Aydogdu, H.H. C. Demir, M. Comert, T. Kahraman, A. Ilki, “Structural characteristics of the earthquake-prone buildings in Istanbul and prioritization of existing buildings in terms of seismic risk-A pilot project conducted in Istanbul”, Journal of Earthquake Engineering, accepted, August, 2023.  

 

A87. Ates, A.O., S. Hajihosseinlou, A. Nasrinpour, C. Demir, M. Comert, M. Marasli, A. Ilki, “Seismic retrofit of substandard RC columns using sprayed glass fiber-reinforced mortar and basalt textile reinforcement”, Journal of Earthquake Engineering, accepted, August, 2023.  

 

A86. Aydogdu, H.H. C. Demir, T. Kahraman, A. Ilki, “Evaluation of rapid seismic safety assessment methods on a substandard reinforced concrete building stock in Istanbul”, Structures, accepted, July, 2023.  

 

A85. Ates, A.O., G. Durmus, A. Ilki, “Tensile and flexural behaviors of basalt textile reinforced sprayed glass fiber mortar composites”, Materials, 16(12), 4251, June 2023.  https://doi.org/10.3390/ma16124251

A84. Yilmaz, C., O. Kirtel, G. Dok, A. Ilki, “Experimental investigation on the post-impact behavior of normal-strength reinforced concrete beams subjected to drop-weight impact loads”, Arabian Journal for Science and Engineering, accepted, February 2023. 

A83. Dogan, G., H.M. Arslan, A. Ilki, “Detection of Damages Caused by Earthquake and Reinforcement Corrosion in RC Buildings with Deep Transfer Learning”, Engineering Structures, accepted, January 2023. 

 

A82. Seyhan, E., C. Goksu, I. Saribas, A. Ilki, “Hybrid use of externally embedded FRP reinforcement for seismic retrofitting of substandard RC columns”, ASCE, Journal of Composites for Construction, accepted, December 2022. https://ascelibrary.org/doi/10.1061/JCCOF2.CCENG-3906 

A81. Halici, O.F., U. Demir, Y. Zabbar, A. Ilki, “Out-of-plane seismic performance of bed-joint reinforced autoclaved aerated concrete (AAC) infill walls damaged under cyclic in-plane displacement reversals”, Engineering Structures, 286, 116077, 2023.  https://doi.org/10.1016/j.engstruct.2023.116077

A80. Dalgic, D.K., B. Gulen, Y. Liu, S. Acikgoz, H. Burd, M. Marasli, A. Ilki, “Masonry buildings subjected to settlements: half-scale testing, detailed measurements, and insights into behaviour”, Engineering Structures, 278, 115233, 2023.  https://doi.org/10.1016/j.engstruct.2022.115233

A79. Hojdys, L., P. Krajewski, A. Kwiecien, T. Rousakis, V. Vanian, M. Tekeli, A. Viskovic, A. Ilki, et al., “Quick repair of damaged infill walls with externally bonded FRPU composites: Shake table tests”, ASCE, Journal of Composites for Construction, accepted, October, 2022. 

 

A78. Gurbuz, T., A. Cengiz, S. Kolemenoglu, C. Demir, A. Ilki, “Damages and failures of structures in Izmir (Turkey) during the October 30, 2020 Aegean Sea earthquake”, Journal of Earthquake Engineering, accepted, April, 2022.

A77. Inci, P., C. Goksu, E. Tore, E. Binbir, A.O. Ates, A. Ilki, “Assessment of seismic demand and damping of a reinforced concrete building after CFRP jacketing”, Structural Engineering and Mechanics, 82(5),651-665, 2022. https://doi.org/10.12989/sem.2022.82.5.651

A76. Demir, C., M. Comert, P. Inci, S. Dusak, A. Ilki, “Seismic retrofitting of the 19th century Hirkai-i Serif Mosque using textile reinforced mortar”, International Journal of Architectural Heritage, April, 2022. https://doi.org/10.1080/15583058.2022.2038305

 

A75. Ispir, M., A.O. Ates, A. Ilki, “Low strength concrete: stress-strain curve, modulus of elasticity and tensile strength”, Structures, 38, 1615-1632, April, 2022. https://doi.org/10.1016/j.istruc.2022.01.018

A74. Bedirhanoglu, I., A. Ilki, T. Triantafillou, “Seismic behavior of repaired and externally FRP jacketed short columns built with extremely low-strength concrete”, ASCE, Journal of Composites for Construction, 26(1), February, 2022. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001179

A73. Yakut, A., H. Sucuoglu, B. Binici, E. Canbay, C. Donmez, A. Ilki, A. Caner, O.C. Celik, B.O. Ay, "Performance of structures in Izmir after the Samos Island earthquake", Bulletin of Earthquake Engineering, September,  2021. https://doi.org/10.1007/s10518-021-01226-6

 

A72. Pul, S., M. Senturk, A. Ilki, I. Hajirasouliha, "Experimental and numerical investigation of a proposed monolithic-like precast concrete column-foundation connection", Engineering Structures, 246, 113090, Nov., 2021. https://doi.org/10.1016/j.engstruct.2021.113090 

A71. Tore, E., C. Demir, M. Comert, A. Ilki, "Seismic collapse performance of a full-scale concrete building with lightly reinforced columns", ASCE Journal of Structural Engineering, 147(12), December, 2021. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003178

A70. Ispir, M., K.D. Dalgic, A. Ilki, “Cyclic compressive behavior of hybrid FRP-confined concrete”, ASCE, Journal of Composites for Construction, 25(5), October, 2021. https://doi.org/10.1061/(ASCE)CC.1943-5614.0001156

A69. Demir, U., G. Unal, C. Goksu, I. Saribas, A. Ilki, "Post-fire seismic behavior of RC columns built with sustainable concrete", Journal of Earthquake Engineering, May, 2021. https://doi.org/10.1080/13632469.2021.1927897 

A68. Mezrea, P.E., M. Ispir, I.A. Balci, I.E. Bal, A. Ilki, "Diagonal tensile tests on historical brick masonry wallets strengthened with fabric reinforced cementitious mortar", Structures, 33, 935-946, October, 2021. https://doi.org/10.1016/j.istruc.2021.04.076

A67. Inci, P., C. Goksu, E. Tore, A. Ilki, "Effects of seismic damage and retrofitting on a full-scale substandard RC building-Ambient vibration tests", Journal of Earthquake Engineering, February, 2021. https://doi.org/10.1080/13632469.2021.1887009

A66. Dok, G., N. Caglar, A. Ilki, C. Yilmaz, "Residual load bearing capacity and failure mechanism of impacted high-strength reinforced concrete shear beams", Engineering Failure Analysis, 121, 2021. https://doi.org/10.1016/j.engfailanal.2020.105185

A65. Saribas, I., C. Goksu, E. Binbir, A. Ilki, "Shear-flexure interaction in RAC columns under simulated seismic actions", Engineering Structures, 231, 2021. https://doi.org/10.1016/j.engstruct.2020.111746

 

A64. Rousakis, T., A. Ilki, A. Kwiecien, A. Viskovic, M. Gams, P. Triller, et al., "Deformable polyurethane joints and fibre grids for resilient seismic performance of reinforced concrete frames with orthoblock brick infills", Polymers, 12(12), 2020. https://doi.org/10.3390/polym12122869

A63. Dok, G., N. Caglar, A. Ilki, C. Yilmaz, "Effect of impact loading on residual flexural capacity of high-strength reinforced concrete beams", Structures, 27, 2460-2480, Oct, 2020.https://doi.org/10.1016/j.istruc.2020.08.054

A62. Bas, S., C.Z. Dong, M.N. Apaydin, A. Ilki, N. Catbas, "Hanger replacement influence on seismic response of suspension bridges: Implementation to Bosphorus Bridge subjected to multi-support excitation", Earthquake Engineering and Structural Dynamics, 49(14), 2020. https://doi.org/10.1002/eqe.3314

 

A61. Demir, U., C. Goksu, G. Unal, M. Green, A. Ilki, "Effect of fire damage on seismic behavior of cast-in-place reinforced concrete columns", ASCE Journal of Structural Engineering, 146(11), 04020232, 2020. 

A60. Demir, U., C. Goksu, E. Binbir, A. Ilki, "Impact of time after fire on post-fire seismic behavior of RC columns", Structures, 26, 537-548, August, 2020.  https://doi.org/10.1016/j.istruc.2020.04.049

A59. Demir, U., M. Green, A. Ilki, "Post-fire seismic performance of precast RC columns", PCI Journal, 65(6),62-80, Nov-Dec, 2020. https://doi.org/10.15554/pcij65.6-01

 

A58. Gunes, B., A. Ilki, N.K. Oztorun, "Determination of monitoring parameters for fatigue behavior of steel-concrete composite bridge girders with welded full depth transverse stiffeners", Sustainability,12(1), 2020.

https://doi.org/10.3390/su12010283

A57. Senturk, M., S. Pul, A. Ilki, I. Hajirasouliha, "Development of a monolithic-like precast beam-column moment connection: experimental and analytical investigation", Engineering Structures, 205, Feb., 2020. https://doi.org/10.1016/j.engstruct.2019.110057

A56. Saribas, I., C. Goksu, E. Binbir, A. Ilki, "Seismic performance of full-scale RC columns containing high proportion recycled aggregate", Bulletin of Earthquake Engineering, 17, 6009-6037, 2019.  https://doi.org/10.1007/s10518-019-00687-0

A55. Goksu, C., I. Saribas, E. Binbir, Y. Akkaya, A. Ilki, "Structural performance of recycled aggregates concrete sourced from low strength concrete", Structural Engineering and Mechanics, 69(1), 77-93, 2019. 

A54. Demir, U., M. Ispir, Y. Sahinkaya, G. Arslan, A. Ilki, “Axial behavior of noncircular high-performance fiber-reinforced cementitious composite members externally jacketed by CFRP sheets”, ASCE, Journal of Composites for Construction, 23(4), 2019.

A53. Ates, A.O., S. Khoshkholghi, E. Tore, M. Marasli, A. Ilki, “Sprayed glass fiber reinforced mortar with or without basalt textile reinforcement for jacketing of low strength concrete prisms”, ASCE, Journal of Composites for Construction, 23(2), April, 2019.

A52. Cosgun, C., C. Demir, M. Comert, A. Ilki, “Seismic retrofit of joints of a full-scale 3D reinforced concrete frame with FRP composites”, ASCE, Journal of Composites for Construction, 23(2), April, 2019.

A51. Halici, O.F., K. Ugurlu, C. Demir, M. Comert, A. Ilki, “Evaluation of diaphragm conditions in AAC floor structures”, Bulletin of Earthquake Engineering, 16, 6131-6162, 2018.

 

A50. Ispir, M., K.D. Dalgic, A. Ilki, “Hybrid confinement of concrete through use of low and high rupture strain FRPs”, Composites Part B, 153, 243-255, 2018.

 

A49. Ghatte, H.F., M. Comert, C. Demir, M. Akbaba, A. Ilki, “Seismic retrofit of full-scale substandard extended rectangular RC columns through CFRP jacketing: Test results and design recommendations”, ASCE, Journal of Composites for Construction, 23(1), Feb., 2019.

 

A48. Gurbuz, T., A. Ilki, D.P. Thambiratnam, N. Perera,   “Low elevation impact tests of axially loaded reinforced concrete columns”, ACI Structural Journal, 116(1), 117-128, 2019. 

A47. Dalgic, D.K., M.A.N. Hendriks, A. Ilki, W. Broere,   “A two-stage analysis approach for the assessment of the settlement response of the pre-damaged historic Hoca Pasha Mosque”, International Journal of Architectural Heritage, 13(5), 704-724, 2019. 

A46. Demir, U., Y. Sahinkaya, M. Ispir, A. Ilki, “Assessment of axial behavior of circular HPFRCC members externally confined with FRP sheets”, Polymers, 10(2), Article 138, 2018. 

A45. Dalgic, D.K., M.A.N. Hendriks, A Ilki, “Building response to tunnelling- and excavation-induced ground movements: using transfer functions to review the limiting tensile strain method”, Structure and Infrastructure Engineering, 14(6), 766-779, 2018. 

A44. Bas, S., N.M. Apaydin, A. Ilki, N. Catbas, “Structural health monitoring system (SHMs) of the long-span bridges in Turkey”, Structure and Infrastructure Engineering, 14(4), 425-444, 2018. 

 

A43. Halici, O.F., D.K. Dalgic, O. Ozeren, K. Ugurlu, C.Demir, M. Comert, A. Ilki, "From experiments to seismic design rules for structures built with reinforced autoclaved aerated concrete panel", ce/papers, 2, doi:10.1002/cepa.831, 2018.

A42. Comert, M., C. Demir, A.O. Ates, K. Orakcal, and A. Ilki, “Seismic performance of three-storey full-scale sub-standard reinforced concrete buildings” Bulletin of Earthquake Engineering, 15(8), 3293-3320, 2017. 

A41. Goksu, C., P. Inci, U. Demir, U. Yazgan, and A. Ilki, “Field testing of substandard RC buildings through forced vibration test” Bulletin of Earthquake Engineering, 15(8), 3245-3263, 2017. 

A40. Mezrea, P.E., I.A. Yilmaz, E. Binbir, M. Ispir, I.E. Bal, and A. Ilki, “External jacketing of unreinforced historical masonry piers with open-grid basalt reinforced mortar” ASCE, Journal of Composites for Construction, 21(3), Article Number: 04016110, 2017. 

A39. Ghatte, H.F., M. Comert, C. Demir, and A. Ilki, “Evaluation of FRP confinement models for substandard rectangular RC columns based on full-scale reversed cylic lateral loading tests in strong and weak directions” Polymers, 8(9), doi:10.3390/polym8090323, 2016. 

A38. Cavunt, Y.S., D. Cavunt, and A. Ilki, “Indoor and outdoor pullout tests for retrofit anchors in low strength concrete” Computers and Concrete, 18(5), 951-968, 2016. 

A37. Kaya, E., C. Kutan, S. Sheikh, and A. Ilki, “Flexural retrofit of support regions of reinforced concrete beams with anchored FRP ropes using NSM and ETS methods under reversed cyclic loading,” ASCE, Journal of Composites for Construction, 21(1), Article Number: 04016072, 2017. 

A36. Goksu, C., and A. Ilki, “Seismic behavior of reinforced concrete columns with corroded deformed reinforcing bars,” ACI Structural Journal, 113(5), 1053-1064, 2016. 

A35. Akbas, T.T., O.C. Celik, C. Yalcin, and A. Ilki, “Monotonic and cyclic bond behavior of deformed CFRP bars in high strength concrete,” Polymers, 8(6), June 2016. 

A34. Seyhan, E.C., C. Goksu, A. Uzunhasanoglu, and A. Ilki, “Seismic behavior of substandard RC columns retrofitted with embedded AFRP reinforcement,” Polymers, 7(12), 2535-2557, 2015. 

A33. Dalgic, K., M. Ispir, A. Ilki “Cyclic and monotonic compression behavior of CFRP jacketed damaged non-circular concrete prisms,” ASCE, Journal of Composites for Construction, 20(1), Article Number: 04015040, 2016. 

A32. Goksu, C., P. Inci, and A. Ilki, "The effect of corrosion on bond mechanism between extremely low strength concrete and plain reinforcing bars," ASCE J. Perf. Const. Facilities, 30(3), Article number 04015055, 2016. 

A31. Demir, C., K. Darilmaz, and A. Ilki, Cyclic stress-strain relationships of FRP confined concrete members, The Arabian Journal for Science and Engineering, 40(2), 363-379, 2015. 

A30. Demir, C., A. Kucukkapili, D. Doyrangul, and A. Ilki, The effects of loading rate and duration on the axial behavior of low-strength and medium-strength noncircular concrete members confined by fiber-reinforced polymer sheets, Polymers, 6(6), 1685-1704, 2014. 

A29. Yuksel, E., F. Karadogan, E. Bal, A. Ilki, A. Bal, P. Inci, Seismic behavior of two exterior beam-column connections made of normal-strength concrete developed for precast construction, Engineering Structures, 99, 157-172, 2015. 

A28. Demir, C., and A. Ilki, Characterization of the materials used in the multi-leaf masonry walls of monumental structures in Istanbul, Turkey, Construction and Building Materials, 64, 398-413, 2014. 

A27. Ilki, A., M. Comert, C. Demir, K. Orakcal, D. Ulugtekin, M. Tapan and N. Kumbasar, Performance based rapid seismic assessment method (PERA) for reinforced concrete frame buildings, Advances in Structural Engineering, 17(3), 439-459, 2014. 

A26. Goksu, C., H. Yilmaz, S.R. Chowdhury, K. Orakcal, and A. Ilki, The effect of lap splice length on the cyclic lateral load behavior of RC members with low-strength concrete and plain bars, Advances in Structural Engineering, 17(5), 639-658,2014. 

A25. Garcia, R., I. Hajirasouliha, M. Guadagnini, Y. Helal, Y. Jemaa, K. Pilakoutas, P. Mongabure, C. Chrysostomou, N. Kyriakides, A. Ilki, N. Taranu, M.A. Ciupala, L Torres and M. Saiidi, “Full-scale shaking table tests on a sub-standard RC building repaired and strengthened with post-tensioned metal straps, Journal of Earthquake Engineering, 18(2), 187-213, 2014. 

A24. Bedirhanoglu, I., A. Ilki, and N. Kumbasar, “Precast fiber reinforced cementitious composites for seismic retrofit of deficient rc joints - a pilot study,” Engineering Structures, 52, 192-206, 2013. 

A23. Tapan, M., M. Comert, C. Demir, Y. Sayan, K. Orakcal, and A. Ilki, “Failures of Structures during the October 23, 2011 Tabanlı (Van) and November 9, 2011 Edremit (Van) Earthquakes in Turkey, Engineering Failure Analysis, 34, 606-628, 2013. 

A22. Inci, P., C. Goksu, A. Ilki, and N. Kumbasar, “Effects of Reinforcement Corrosion on the Performance of RC Frame Buildings Subjected to Seismic Actions,” ASCE J. Perf. Const. Facilities, 27(6), 683-696, 2013. 

A21. Koroglu, M.A., M. Ceylan, M.H. Arslan, and A. Ilki, “Estimation of Flexural Capacity of Quadrilateral FRP-Confined RC Columns using Combined Artifical Neural Network,” Engineering Structures, 42, 23-32, 2012. 

A20. Koksal, F., A. Ilki, and M.A. Tasdemir, “Optimum Mix Design of Steel Fiber Reinforced Concrete Plates,” Arabian Journal of Science and Engineering, (accepted in 2012). 

A19. Ispir, M., and A. Ilki, “Behavior of Historical Unreinforced Brick Masonry Walls under Monotonic and Cyclic Compression,” Arabian Journal of Science and Engineering, 38(8), 1993-2007, 2013. 

A18. Goksu, C., A. Polat, A. Ilki “An Attempt for Seismic Retrofit of Existing Sub- Standard RC Members under Reversed Cyclic Flexural Effects,” ASCE, Journal of Composites for Construction, 16(3), 286-299, 2012. 

A17. Ilki, A. and Z. Celep, “Earthquakes, Existing Buildings, and Seismic Design Codes in Turkey,” Arabian Journal of Science and Engineering, 37(2), 365-380, 2012. 

A16. Ozsayin, B., E. Yilmaz, M. Ispir, H. Ozkaynak, E. Yuksel, and A. Ilki, “Characteristics of CFRP Retrofitted Hollow Brick Infill Walls of Reinforced Concrete Frames,” Construction and Building Materials, 25(10), 4017-4024, 2011. 

A15. Celep, Z., A. Erken, B. Taskin and A. Ilki, “Failures of masonry and concrete buildings during the March 8, 2010 Kovancilar and Palu (Elazig) Earthquakes in Turkey,” Engineering Failure Analysis, 18, 868-889. 2011. 

A14. Ilki, A., I. Bedirhanoglu and N. Kumbasar, “Behavior of FRP Retrofitted Joints Built with Plain Bars and Low-Strength Concrete,” ASCE J. Comp. Const., 15(3), 312-326, 2011. 

A13. Gurbuz, T., and A. Ilki, "Pullout Performance of Fully and Partially Bonded Retrofit Anchors in Low Strength Concrete," ACI Structural J., 108(1), 61-70, 2011. 

A12. Comert, M., and A. Ilki, The Explosion Performance of a Ball Powder Production Facility, ASCE J. Perf. Const. Facilities, 24(4), 326-336, 2010. 

A11. Ispir, M., C. Demir, A. Ilki and N. Kumbasar, "Material Characterization of the Historical Unreinforced Masonry Akaretler Row Houses in Istanbul," ASCE J. Mat. Civ. Eng., 22(7), 702-713, 2010. 

A10. Bedirhanoglu, I., A. Ilki, S. Pujol, N. Kumbasar, “Behavior of Deficient Joints with Plain Bars and Low-strength Concrete,” ACI Structural J., 107(3), 300-310, 2010. 

A9. Demir, C., K. Kolcu, A. Ilki, “Effects of Loading Rate and Duration on Axial Behavior of Concrete Confined by Fiber Reinforced Polymer Sheets,” ASCE J. Comp. Const., 14(2), 146-151, 2010. 

A8. Ilki, A., C. Demir, I. Bedirhanoglu, N. Kumbasar, “Seismic Retrofit of Brittle and Low Strength RC Columns using Fiber Reinforced Polymer and Cementitious Composites,” Advances in Structural Engineering, 12(3), 325-347, 2009. 

A7. Eraybar, K., K. Okazaki, A. Ilki, "An Exploratory Study on the Perception of Seismic Risk and Mitigation in Two Districts of Istanbul", Disasters, 34(1), 71-92, (2010). 

A6. Ilki, A., O. Peker, E. Karamuk, C. Demir and N. Kumbasar, “FRP Retrofit of Low and Medium Strength Circular and Rectangular Reinforced Concrete Columns,” ASCE J. Mat. Civ. Eng., 20(2), 169-188, (2008). 

A5. İlki, A., N. Kumbasar ve V. Koç, “Low Strength Concrete Members Externally Confined with FRP Sheets,” Int. J. Str. Eng. Mech., 18(2), 167-194 (2004). 

A4. İlki, A., N. Kumbasar, P. Özdemir ve T. Fukuta, “A Trilinear Stress-strain Model for Confined Concrete,” Int. J. Str. Eng. Mech., 18(5), 541-563, (2004). 

A3. İlki, A. ve N. Kumbasar, “Compressive Behaviour of Carbon Fiber Composite Jacketed Concrete with Circular and Non-circular Cross-sections,” J. Earthquake Engineering, 7(3), 381-406 (2003). 

A2. İlki, A., N. Kumbasar ve V. Koç, “Low and Medium Strength Concrete Members Confined by Fiber Reinforced Polymer Jackets,” ARI Bulletin of the Technical University of Istanbul, 53(1), 118-123 (2003). 

A1. İlki, A. ve N. Kumbasar, “Behavior of Damaged and Undamaged Concrete Strengthened by Carbon Fiber Composite Sheets,” Int. J. Str. Eng. Mech., 13(1) 75-90 (2002). 

bottom of page